Long,screw in Yasni Exposé of Liu Fei

Detailed Product Description 1.Caterpillar Long Screw Pile 2.High performance 3.Low noise,eco-friendly,newly 4.Drilling depth 30m,dia 800mm   1.   Uses     This kind of Caterpillar Type Long Screw Pile Rig is broadly applied to the foundation construction of industrial and civil building, and is a environmental-friendly piling mechanical product which is specially used in urban construntion.      2.  Features      This long screw drilling machine is a kind of deep drilling machine developed by the company.      The  pile holder adopts ship like track,caterpillar type travel with flexible displacement and convenient emplacement.      The drilling machine applies electrohydraulic concentrative control which is convennience for operation.         It has three-point support upright post that can be adjusted at the back and forth or on the left and right.The whole machine can realize the 360°revolution.     The part of drilling tools apply three ring decelerator for power, key type flange as drill rod being safe,reliable,and shortcut dismantling.     The drilling machine can be equipped with construction techniques such as superfluid, high pressure slurry filling and dry method bore forming.   3.  Security&Usability        In the pile operation, this machine has high pore forming efficiency, good quality, no shock, noise or pollution and high degree of mechanization.     It has better performance than hammering and pile sinking methods for penetrating the sand and gravel layers, at the same time, it can avoid the adverse effect on the adejacent buildings due to the hammering and vibration pile sinkings press on foundation.    .   4.  Main Technical Parameter      Model ZKL-30 Hole diameter(mm) 400  600 800 Drilling depth(m)     30 25   Powe r unit Power(kw) 55×2 Rotati on(r/min) 24.2 Torque(KN.m) 48 Allowable drill drawingout force(KN) 400 Pile holder Mass(t) 60   The inclination range of upright post 12° 3° 12 °ahead and 3° back Contact area pressure ratio(MPa) 0.045-0.35 Travel speed(m/min) 4.5 Revolution angle 0-0.5 Rotation speed(r/min) 360° Step lengh(m) 3.0 The max allowable slope angle 2°  Working external dimensions(m) 13.5×6×36   Can be equipped with vibratory Hammer multishaft type continuous wall drilling machine   Below 120kw     ZKL-33 ZKL-30 Caterpillar Type Long Screw Pile Rig

Detailed Product Description Long Screw Drill Tools Can realize the 360 degree full revolution Flexible, Convenient No shock,noise or pollution Long Screw Drill Tools  Main Technical Parameter  Model ZKL-18Type ZKL-20Type  Hole diameter(mm) 400,600 800 400,6 00 800  Drilling depth(m) 18 16 20 16   Power unit Power (kw) 37 × 2  Rotation(r/min) 23,40  Torque(KN.m) 30.7 Travel step length (m) 1.1 Revolution angle° 360°   Pile holder Mass (t)   Operating mode 24.5 30 External diameters Length×width×height(m) Pullin g mode 18 21 Operating mode 8.5×4.5×22.5 10×4.9×24.7 Pulling mode 13.3×3×3.6 13.3×3.1×4   Product description: The drilling rig is a new pile foundation consruction machine that applies hydraulic caterpillar travel,electric control rise and fall,adjustable double speed power unit,and long screw drilling.The hydraulic chassis can realize the 360°full revolution,with quick and accurate emplacement,displacement,leveling and other actions.The drilling machine applies proper motion rise and fall folding pile holder,pulling transport mode,and two electric control winding engines for boring operation,or influx operation through proper motion hoisting reinforcement cage.The output axis of power unit is hollow,it can be used for construction in the common long screw dry method,through changing the drilling tool system,the drilling machine can be applied to the constuction in deep layer agitating method.The front control room applies centralized control,with open sight. This series of drilling machine,with the features such as high efficiency pore forming,good piling quality and no pollution,is specially applicable to the mechanized construction of urban construction and reconstruction projects.   ZKL-20 ZKL-18 Caterpillar Long Screw Drill Tools

Detailed Product Description machine drilling 1.being vibration,noise and pollution free 2.stable,safe,reliable and shortcut machine drillingThis kind of product is a new product researched by the company since 1999.This series of drilling machine consists of the pile holder and drilling system.The chsssis of pile holder applies full hydraulic caterpillar type travel,the hydraulic motor drive revolution support realizes the 360 °full revolution.With four hydraulic end frames,the drilling machine can realize the caterpillar type travel and increase the complete machine stability for construction.The lifting support applies the operation mode of combining the hoisting and builtin oil cylinder,being stable,safe,reliable and shortcut.The complete machine applies convenient semi disassembly pull transport;the drilling tool system applies three ring decelerator 110kw power unit,flange key screw drill rod,and aiguille adaptable to different stratums.The drilling machine,as ideal civilized construction machine for pile foundations of industrial and civil building,can be used for long screw,slip casting method and ultra flow form construction,being vibration,noise and pollution free,with high pore forming efficiency and good pile formation quality.   Main Technical Parameter   Model ZKL-25 ZKL-26 Hole diameter (mm) 400 600 800 400 600 800 Drilling depth(m) 25 25 20 26 26 20 Power unit Power(kw) 55 × 2 55 × 2 Rotation(r/min) 24.2 24. 2 Torque(KN.m) 43.5 43.5 Allowable drill drawingout force( KN) 300 300 Pile holder Mass(t) 45 46 Transport mass(t) 20 20 Rotation speed (r/min) 0-0.6 0-0.6 Uprigh t post slide way track gauge(mm)   600 600 Revol ution angle(°) 360° 360° Externa l diameters Length×width×height (m)   Operating mode 12 ×  5 × 30 12 × 5 × 31 Pulling mode   10.5 × 3 ×3.1 10.5 × 3 × 3.1       ZKL-26 Caterpillar Type Long Screw machine drilling

Detailed Product Description diamond core drilling rig 1.wide rotate speed range 2.hydromatic brake 3.monitor, alarm of the parameters 4.easy operation, diamond core drilling rig HF-5        1.Introduction:   HF-5 rock drill is a new type drill. It can be used in engineering geology exploration, hydrology, well, and big caliber construction. It's a spindle type drill. It has inherited many merits from the former type, such as simple structure, easy operation, convenient maintenance.Except for the above merits, there are also some outstanding advantages as follows:   HF-5 drill has a wide rotate speed range(41-1071rpm) with many velocity shelves(12 gearshifts) which are distributed in reason, It can meet the demand of various high efficiency driling technics such as diamond rope sampling, impact gyration, directional drilling,counter-circle consecutive sampling and so on, and conventional method’s anerture matching. It suits for multi-drill technics. HF-5 drill can export big torsional moment whose intensity is high. Its drilling capability is strong. It can be used in wide range. Adopting the connecting rod reinforcement spring cramp and hydraulic pressure loosen normal close chuck whose structures are novel and compensate perfomance is good and hard alloy welding on spider,the clamping can be with large force, longevity and high reliability. Adopting the hydromatic brake, the drilling tools can be dropped at quiet and on the safe side, and the life of band type brake is long. Adopting hydraulic system of double oil pump supplying oil decreases the heat of system, which meets diversified operating condition. Equipped with the light automobile’s gearbox, clutch, universal transmission shaft and other high quality general parts which leads to long-life, high reliability and convenient replacement. The monitor and alarm of the parameters such as torque, drilling pressure, displacement of pump, pump pressure, rotation rate and so on can be realized, which prevents and reduces boring accident. The ability of mud pump’s accoutrement is strong. The drive machine can be chose between the electromotor and diesel engine.The disposition of the mud pump, grief joint and water tap is agile and convenient   2. Technical Parameter            Engine Name Electrical motor Diesel engine model Type Y250M-4B35 R410 5 IZLD Power (Kw) 55 75 Speed (r/min) 1480 1500 Chisel in the ability Φ50 Drilling rod Drilling depth

Detailed Product Description HF150E Drill Machines Parts 1.Long using time 2.Easy handling 3.Portable 4.Economical HF150E Drill Machines Parts     1.Long using time.The machine is reliable and durable.2.Easy handling.One to two person can operate it.3.Portable.Small volume and weight.4.Economical.This is one of the most unexpensive water well drills,even common family could have one.      Main Technical Parameter  Type HF150E Hig ht of tower 3m Max. Drilling Diameter 150mm Measurement 300 0mm*500mm*500mm Max.Drilling Depth 100m Total Weight 500kgs Engine Power 1.0kw Drilling Rod Length 2m/piece Capacity of hoist 1.5t Diameter of Drilling Rod 40mm   Made in China!Economical and Easy Handling HF150E Drill Machines Parts

Detailed Product Description HF80 water well drill rigs for sale 1,for irrigation&potable water drilling equipment 2,good performance 3,smallest&cheapest Easy-handle !  most economic and practical well drill equipment ,HF80 water well drill rigs for sale    1,This portable water well drilling equipment is widely used for drink water well drilling    2,the quality and the performance is safty and reliable    3,the drilling depth is 60-80m,the drilling diameter is 70-300mm    4,the weight and dimension of this machine is small,convenient and easy to operate, labor-saving ,high efficiency and long usage life.    the technical parameter: Drilling depth 60-80m Drilling diameter 70-300mm Power Engine 7.5KW Rotary speed 200r/min Rotary table diameter 80mm Rotary table torque 100KN.m Dimension(LXWXH) 1100X600X500mm Weight 0.1 35 t      Easy-handle ! most economic and practical well drill equipment ,HF80 water well drill rigs for sale